Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Technical Data Sheet (TDS) Download Center
Technical Hub & Data Center
Official engineering documentation, ASTM certified benchmarks, processing manuals, and GHS Safety Data Sheets.
SYSTEM 01Deep Pour River Table
SYSTEM 02Quartz Epoxy Flooring
SYSTEM 03Arts & Crafts Resin
SYSTEM 04Pebble Stone Binder
SYSTEM 05Polyaspartic Polyurea
SYSTEM 06Stone & Furniture Glue
Deep Pour Epoxy Resin for River Table Kit
3:1 Mass Mixing Ratio // Low Exotherm Mass Casting Formulation
PureEpox Deep Pour Epoxy is a professional-grade two-component casting system specifically formulated for deep river channels in live-edge wood furniture, artistic mass casting, and void encapsulation.
Engineered with high-grade cycloaliphatic and aliphatic amine hardeners, this formulation features an exceptionally low exothermic peak and extended open time (6-10 hours), allowing trapped micro-bubbles to release naturally without forced torch heating.
- Single-Pour Safe Depth: Up to 30 mm in non-insulative molds, and up to 20 mm adjacent to thermal-insulating solid timber slabs.
- Optically Pure Transparency: Refractive index matching optical glass, with built-in UV absorbers resisting ambering.
- Dimensional Stability: Shrinkage below 0.3%, preventing live-edge delamination and tension cracking.
Deep Pour Epoxy Resin for River Table Kit
3:1 Mass Mixing Ratio // Low Exotherm Mass Casting Formulation
| Mix Ratio by Weight (A : B) | 3 : 1 strictly by mass (electronic scale required) |
| Visual Clarity | Optically transparent, water-clear grade (APHA ≤ 20) |
| Safe Single-Pour Depth | ≤ 30 mm (pure mold) / ≤ 20 mm (hardwood river channel) |
| Working Time / Pot Life | 6 – 10 Hours (100g mix @ 25°C) |
| Gel Time | 12 – 16 Hours (@ 25°C) |
| Demolding Window | 3 – 4 Days (do not machine or sand at demold) |
| Mechanical Sanding / Routing | 7 Days after pouring |
| Full Chemical & Hardness Cure | 7 – 14 Days (Shore D ≥ 82) |
| Viscosity @ 25°C | Part A: 450–650 mPa·s | Part B: 60–100 mPa·s |
| Volume Shrinkage | ≤ 0.28% (ASTM D792) |
Technical Submittals
Need third-party ASTM lab test certifications?REQUEST CERTIFICATE COPIES
Deep Pour Epoxy Resin for River Table Kit
3:1 Mass Mixing Ratio // Low Exotherm Mass Casting Formulation
Q1: Why must Part A and Part B be mixed strictly by weight?
Because Part A (epoxy resin) and Part B (polyetheramine curing agent) possess different specific gravities. Measuring by volume will introduce substantial stoichiometric errors, leading to tacky surfaces or premature thermal exotherm.
Q2: What causes bubbling or milky discoloration in river tables?
Discoloration is predominantly caused by timber moisture content exceeding 12%, or omitting the vital wood capillary seal coat prior to the main pour.
Q3: Can I pour greater than 30 mm in a single pass?
If ambient temperature is above 24°C, pouring deeper than 20–22 mm against insulating hardwoods increases exothermic runaway risks. Multi-tier pours (wait 24h until gelatinous) are strongly advised for deeper voids.
Deep Pour Epoxy Resin for River Table Kit
3:1 Mass Mixing Ratio // Low Exotherm Mass Casting Formulation
1. Timber Preparation: Kiln-dry wood to 8–12% moisture. Plane surfaces and apply a thin seal coat over all live edges to seal wood outgassing pores.
2. Mold Construction: Seal melamine box corners with neutral silicone. Line inner mold with polypropylene release tape. Clamp wood slabs firmly to resist resin buoyancy.
3. Mixing & Pouring: Weigh A:B at 3:1 ratio. Stir slowly for 3–5 minutes scraping container walls. Pour gently into the lowest point of the mold. Demold after 3–4 days; wait 7 days before routing or wet sanding.
Deep Pour Epoxy Resin for River Table Kit
3:1 Mass Mixing Ratio // Low Exotherm Mass Casting Formulation
Hazard & PPE Safety Guidelines (GHS Compliant)
Part A contains bisphenol-A epoxy resin (skin sensitizer). Part B contains polyetheramine hardener (corrosive). Operate in a well-ventilated workshop.
- Wear nitrile gloves, splash safety goggles, and organic vapor respirators during dispensing.
- In case of skin contact, wash immediately with soap and water. Never clean skin with acetone.
Quartz Self-Leveling Epoxy Flooring System
High-Build Seamless Terrazzo // Sintered Ceramic Quartz Matrix
A heavy-duty, seamless architectural flooring system combining high-temperature ceramic-sintered colored quartz aggregates with a 100% solids, low-odor cycloaliphatic epoxy binder matrix.
Engineered specifically for luxury commercial retail, hospital cleanrooms, automotive galleries, and prestigious residential interiors demanding superior compressive strength and slip-resistant elegance.
Quartz Self-Leveling Epoxy Flooring System
High-Build Seamless Terrazzo // Sintered Ceramic Quartz Matrix
| Compressive Strength | ≥ 85 MPa (ASTM C579) |
| Shore D Hardness | 82 – 86 Shore D (ASTM D2240) |
| Recommended Build Thickness | 2.0 – 5.0 mm |
| Adhesion to Concrete | ≥ 3.5 MPa (Concrete cohesive failure, ASTM D4541) |
| Abrasion Resistance | ≤ 30 mg loss (CS-17, 1000g, 1000 cycles, ASTM D4060) |
| Foot Traffic Return | 24 Hours (@ 25°C) |
| Full Mechanical Cure | 5 – 7 Days (@ 25°C) |
| VOC Content | Ultra-Low VOC (< 50 g/L, EPA Method 24) |
Technical Submittals
Need third-party ASTM lab test certifications?REQUEST CERTIFICATE COPIES
Quartz Self-Leveling Epoxy Flooring System
High-Build Seamless Terrazzo // Sintered Ceramic Quartz Matrix
Q1: How does self-leveling quartz differ from rolled epoxy paint?
Self-leveling quartz creates a monolithic high-build layer (2–5 mm) with extraordinary impact tolerance and compressive load capacity, compared to thin-film paints (0.2–0.3 mm) which wear down quickly.
Q2: Is the surface slip-resistant?
Yes. The natural profile of sintered quartz locked in clear resin delivers balanced wet and dry traction exceeding ADA slip requirements without compromising cleanability.
Quartz Self-Leveling Epoxy Flooring System
High-Build Seamless Terrazzo // Sintered Ceramic Quartz Matrix
Phase 1: Profiling & Priming: Diamond grind concrete to CSP 3. Apply penetrating primer to seal substrate air pores.
Phase 2: Slurry Leveling: Mix A & B, blend in graded quartz granules, pull with gauge rake to specified depth, and de-aerate with spiked roller.
Phase 3: Topcoat: Allow 16–24h cure, then roll clear abrasion-resistant topcoat. Foot traffic ready in 24 hours.
Quartz Self-Leveling Epoxy Flooring System
High-Build Seamless Terrazzo // Sintered Ceramic Quartz Matrix
Quartz Epoxy System Safety Sheet
100% reactive resin matrix. Solvent-free and odorless during indoor application.
Ultra-Clear Arts & Crafts Epoxy Resin
3:1 Weight Ratio // Crystal-Clear Self-Leveling DIY Resin
PureEpox Ultra-Clear Arts & Crafts Epoxy Resin is a premium two-component system developed for artists, DIY creators, craft studios, jewelry makers, and private-label resin brands.
Its smooth self-leveling flow, glass-like transparency, high-gloss finish, UV stability, and natural bubble release make it suitable for jewelry, silicone molds, coasters, decorative art, wood coating, canvas, glass, MDF, and photo protection.
Ultra-Clear Arts & Crafts Epoxy Resin
3:1 Weight Ratio // Crystal-Clear Self-Leveling DIY Resin
| Product Type | Two-Component Clear Epoxy Resin System |
| Components | Resin A + Hardener B |
| Mix Ratio by Weight (A : B) | 3 : 1 |
| Appearance | Crystal Clear / Water-like Transparency |
| Surface Finish | High Gloss, Smooth & Non-Porous |
| Formula | Self-Leveling with Bubble Reduction Technology |
| Working Time | Approx. 40 Minutes |
| Full Cure Time | Approx. 24 Hours at Room Temperature |
| UV Resistance | Excellent UV Stability |
| Odor & VOC Content | Low Odor, Low VOC Formula |
Technical Submittals
Need third-party ASTM lab test certifications?REQUEST CERTIFICATE COPIES
Ultra-Clear Arts & Crafts Epoxy Resin
3:1 Weight Ratio // Crystal-Clear Self-Leveling DIY Resin
Q1: What can Arts & Crafts Epoxy Resin be used for?
It is designed for DIY crafts, resin art, jewelry, silicone molds, coasters, decorative coating, wood, canvas, glass, MDF boards, and photo protection.
Q2: How can bubbles be reduced?
Mix slowly in one direction and allow the mixed resin to rest for several minutes before pouring so trapped air can release naturally.
Q3: Can pigments be added?
Yes. Epoxy-compatible resin pigments, mica powders, and decorative inclusions may be blended into the mixed resin.
Q4: Is it suitable for river tables or deep casting?
No. This formula is intended for crafts, jewelry, molds, and decorative coating. Use the dedicated River Table Epoxy for deep-pour projects.
Ultra-Clear Arts & Crafts Epoxy Resin
3:1 Weight Ratio // Crystal-Clear Self-Leveling DIY Resin
Step 1: Prepare & Measure: Ensure the surface or mold is clean, dry, and dust-free. Weigh Resin A and Hardener B accurately at 3:1 by weight.
Step 2: Mix & Defoam: Stir slowly in one direction for 3–5 minutes, scraping the sides and bottom. Allow the mixture to rest briefly so bubbles can rise.
Step 3: Add Color, Pour & Cure: Add compatible pigments or mica if required, pour within the approximately 40-minute working window, and protect from dust during the approximately 24-hour cure.
Ultra-Clear Arts & Crafts Epoxy Resin
3:1 Weight Ratio // Crystal-Clear Self-Leveling DIY Resin
Arts & Crafts Resin Safety Guidance
Low odor and low VOC do not eliminate normal epoxy-handling precautions. Work with adequate ventilation and wear nitrile gloves and protective eyewear. Avoid skin and eye contact.
Pebble Stone Polyurethane Binder System
UV-Stable Aliphatic Polyurethane // Permeable SUDS Aggregate Surfacing
A moisture-curing, solvent-free aliphatic polyurethane binder engineered exclusively for bonding natural washed pebbles, crushed marble, and bauxite gravel into a puddle-free, sustainable permeable matrix.
Guarantees total UV non-yellowing stability, elasticity under ground thermal shifting, and exceptional water drainage rates exceeding 850 L/m²/min for driveways, patios, and tree surrounds.
Pebble Stone Polyurethane Binder System
UV-Stable Aliphatic Polyurethane // Permeable SUDS Aggregate Surfacing
| Binder Chemistry | Two-Component Aliphatic Polyurethane (100% reactive solids) |
| Binder-to-Aggregate Ratio | 6.5% – 8.0% by weight (approx. 7.0kg resin per 100kg gravel) |
| Water Permeability | > 850 L / m² / minute (SUDS compliant) |
| Working Pot Life | 35 – 45 Minutes (@ 20°C / 50% RH) |
| Pedestrian Foot Traffic | 16 – 24 Hours (@ 20°C) |
| Full Vehicle Load Cure | 48 Hours passenger cars / 7 Days maximum peak |
| UV Accelerated Weathering | No discoloration or chalking (QUV > 2,000 Hours) |
| Installation Depth | Pedestrian: 12–15 mm | Vehicle Driveway: 18–20 mm |
Technical Submittals
Need third-party ASTM lab test certifications?REQUEST CERTIFICATE COPIES
Pebble Stone Polyurethane Binder System
UV-Stable Aliphatic Polyurethane // Permeable SUDS Aggregate Surfacing
Q1: Why must gravel aggregates be 100% dry and dust-free?
Moisture reacts aggressively with polyurethane prepolymers, generating carbon dioxide gas that causes foaming, cloudiness, and bond destruction.
Q2: Can ordinary concrete mixers be used?
No. A forced-action pan mixer is required to ensure every gravel facet is thoroughly coated with resin in 3–4 minutes without grinding stone fines.
Pebble Stone Polyurethane Binder System
UV-Stable Aliphatic Polyurethane // Permeable SUDS Aggregate Surfacing
1. Mechanical Pan Mixing: Mix A & B with helical paddle for 2 mins. Add kiln-dried aggregate into forced-action pan mixer, pour resin, mix 3–4 mins.
2. Screed & Trowel: Spread with screed box. Compact and smooth surface with hand trowel lubricated lightly with organic release agent.
Pebble Stone Polyurethane Binder System
UV-Stable Aliphatic Polyurethane // Permeable SUDS Aggregate Surfacing
Polyurethane Pebble Binder Safety Guide
Contains aliphatic isocyanate prepolymers. Ensure adequate outdoor cross-ventilation.
Polyaspartic Polyurea Waterproof System
Fast-Curing Aliphatic Technology // 1-Day Rapid Service Return
A next-generation 100% solids aliphatic polyaspartic polyurea coating system formulated for high-performance waterproofing and ultra-fast turnaround industrial flooring.
Provides extreme elongation, crack-bridging flexibility, and complete UV colorfastness even under sub-zero installation temperatures (-10°C) across roofs, balconies, and parking decks.
Polyaspartic Polyurea Waterproof System
Fast-Curing Aliphatic Technology // 1-Day Rapid Service Return
| Material Chemistry | 2-Component 100% Solids Aliphatic Polyaspartic |
| Pot Life / Working Time | 20 – 30 Minutes (@ 25°C) |
| Dry to Touch / Walk-on | Touch: 1–2h | Light Foot Traffic: 2–4 Hours |
| Full Vehicle Load Return | 24 Hours (Full chemical peak: 5–7 days) |
| Tensile Strength & Elongation | 25 – 35 MPa / 80% – 200% (Membrane up to 250%) |
| Shore D Hardness | 75 – 85 Shore D (ASTM D2240) |
| Sub-Zero Curing Capability | Cures effectively down to -10°C (14°F) |
| VOC Content | < 50 g/L (Ultra-Low VOC) |
Technical Submittals
Need third-party ASTM lab test certifications?REQUEST CERTIFICATE COPIES
Polyaspartic Polyurea Waterproof System
Fast-Curing Aliphatic Technology // 1-Day Rapid Service Return
Q1: What is the main advantage over standard polyurethane/epoxy?
Polyaspartic cures in hours rather than days, is 100% UV stable outdoors, and can be installed in freezing winter conditions where epoxies fail to crosslink.
Q2: Is it suitable for permanent ponding water?
Yes. Formulated as a seamless elastomeric membrane, it withstands continuous standing water and pool chlorine exposure.
Polyaspartic Polyurea Waterproof System
Fast-Curing Aliphatic Technology // 1-Day Rapid Service Return
Substrate: Concrete must be dry and dust-free. Mix Part A & B thoroughly for 2 minutes.
Application: Pull with notched squeegee and back-roll with microfiber roller. Material sets in 1–2 hours.
Polyaspartic Polyurea Waterproof System
Fast-Curing Aliphatic Technology // 1-Day Rapid Service Return
Polyaspartic Safety Data Sheet
Low-odor, high-reactivity formulation. Use organic vapor cartridge respirators during enclosed rolling.
High Flatting Stone & Furniture Coating Glue
100 : 30 Weight Ratio // Capillary Pore Penetration & Anti-Warping Formula
PureEpox high-flatting clear epoxy coating is engineered exclusively for thin stone veneer furniture production, natural marble slab repair, and surface gloss glazing.
Infiltrates internal capillary pores, reinforces fragile stone backings, and eliminates warping on large-format veneers with controlled shrinkage below 0.4%.
High Flatting Stone & Furniture Coating Glue
100 : 30 Weight Ratio // Capillary Pore Penetration & Anti-Warping Formula
| Mix Ratio by Weight (A : B) | 100 : 30 by Weight / 100 : 34 by Volume |
| Mixed Viscosity (25°C) | 160 – 240 mPa·s (ultra-low penetration grade) |
| Pot Life (100g @ 25°C) | 40 – 50 Minutes |
| Tack-Free / Surface Dry | 8 – 10 Hours (@ 25°C / 50% RH) |
| Volume Shrinkage | ≤ 0.4% (Zero warping on thin stone veneers) |
| Shore D Hardness | 78 – 82 Shore D (ASTM D2240) |
| Adhesion to Natural Stone | ≥ 4.5 MPa (ASTM D4541 substrate failure) |
| Theoretical Coverage | 8 – 12 m² / kg (at 80–180 μm film thickness) |
Technical Submittals
Need third-party ASTM lab test certifications?REQUEST CERTIFICATE COPIES
High Flatting Stone & Furniture Coating Glue
100 : 30 Weight Ratio // Capillary Pore Penetration & Anti-Warping Formula
Q1: Will this glue darken natural white marble?
No. The high optical clarity and aliphatic formulation preserve natural marble veining without yellowing or shadow staining.
Q2: Can it be used on automated factory production lines?
Yes. The rapid self-defoaming kinetics and low surface tension make it ideal for automated curtain coaters and flat roll lines.
High Flatting Stone & Furniture Coating Glue
100 : 30 Weight Ratio // Capillary Pore Penetration & Anti-Warping Formula
1. Ratio: Weigh Part A and Part B at 100:30 by mass. Blend mechanically for 2–3 minutes.
2. Application: Pour onto stone surface and spread with notched squeegee or short-nap fine roller. Cures to tack-free in 8–10 hours.
High Flatting Stone & Furniture Coating Glue
100 : 30 Weight Ratio // Capillary Pore Penetration & Anti-Warping Formula
Stone Coating Epoxy Safety Data Sheet
100% solids, zero VOC formulation compliant with EPA Method 24 standards.